BOW Products Table Saw Fence Breakdown: Choosing Your Ideal Setup

As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.

Upgrading a workshop cutting station often comes down to choosing between a complete modular fence bundle, standalone extruded aluminum rails, or specialized feed and guiding fixtures. Woodworkers operating benchtop, contractor, or cabinet machinery frequently struggle with factory rip fences that lack vertical height, infeed reach, and integrated track mounting. Selecting the right auxiliary components allows operators to stabilize tall stock, support long boards through the blade, and eliminate chatter without replacing their entire machine base.

The BOW Products ecosystem organizes its table saw lineup into three distinct tiers: core aluminum extrusions in multiple lengths, turn-key complete fence kits loaded with supports and hold-downs, and modular work-holding accessories. At the foundation are the heavy-duty extrusions that attach directly to an existing fence face. From there, woodworkers can select complete kits that bundle mounting clamps and foam featherboards, or expand an established extrusion with dedicated guide jigs and wide push blocks designed for consistent rip cuts.

Criteria matrix What each model in this report is credited with

Rows are the criteria that come up in the pros and cons listed for this lineup. A check means the criterion is named in this report’s write-up of that model; a dash means it is not. Criteria that apply to every model, or to only one, are left out because they separate nothing.

Criterion	Ultimate Table Saw XTENDER 8.2/10	XT XTENDER T-Track Table 9.6/10	XT XTENDER XT536 Table 9.2/10	Expandable Push Block 8.0/10	FencePRO FP4 T-Track Featherboard 9.2/10	XT L-Fence System XT4 9.6/10
Extrusion	✓Named	✓Named	✓Named	Not named	✓Named	✓Named
Mounting	✓Named	✓Named	Not named	✓Named	✓Named	✓Named
Aluminum	✓Named	✓Named	✓Named	Not named	Not named	✓Named
Surface	✓Named	Not named	Not named	✓Named	✓Named	✓Named
Feed supports	✓Named	✓Named	✓Named	Not named	Not named	Not named
Adjustable guide follower	Not named	✓Named	Not named	Not named	Not named	✓Named
Clear acrylic	Not named	✓Named	Not named	Not named	Not named	✓Named
XTENDER fence	Not named	✓Named	Not named	Not named	Not named	✓Named
Criteria named	5 / 8	7 / 8	3 / 8	2 / 8	3 / 8	7 / 8

Built from the wording of this report, not from a bench test. A dash is not a fault: it only means the write-up does not mention that point for that model. Scores next to each model are out of 10, based on listed specifications and buyer feedback.

BOW Products Table Saw Fences Lineup at a Glance

The Models in Detail

BOW Products Ultimate Table Saw XTENDER

Best for: Woodworkers wanting an all-in-one fence upgrade kit

Pros

• Includes feed supports and featherboards
• Fast ten-second setup
• T-slots accept two bolt sizes

Cons

• Bulkier complete package for compact benches

The BOW Products Ultimate Table Saw XTENDER represents the most comprehensive package in the lineup, designed to convert portable and contractor saws into high-capacity cutting stations. The core of the package is a 46-inch extruded aluminum fence standing 5 inches high, which gives operators significant vertical guidance when feeding sheet goods or wide boards on edge. The kit packages two XT1 support feeds, two XT2 T-track clamps, an FP1 FeatherPRO featherboard, and two FencePRO FP4 featherboards into a single bundle. This removes the guesswork of sourcing matching hold-downs and brackets separately.

Engineered for swift jobsite or workshop adaptation, this system attaches or detaches from your existing machine fence in under ten seconds. The extrusion features multiple T-slots along its front face, top edge, and rear profile that accept standard 1/4-inch and 5/16-inch hardware. Milled mounting slots allow woodworkers to offset the extrusion forward for maximum infeed stabilization, backward for extended outfeed support, or centered for balanced operations. It also incorporates a specialized wide mounting slot engineered specifically for Delta UniFence and Harvey fences, ensuring broad machine compatibility. Those looking to modernize an aging setup like a craftsman table saw fence will find that this complete kit provides an immediate boost to surface capacity.

This all-inclusive system is ideal for busy woodworkers who want a complete, ready-to-mount package right out of the box without ordering separate clamps or featherboards. It gives way to standalone extrusions for woodworkers who already own compatible clamps or only require bare structural rails.

BOW Products XT XTENDER T-Track Table

Best for: Pattern cutting and tapers with clear visibility

Pros

• Crystal clear acrylic guide plate
• Dedicated adjustable guide follower for radial cuts
• Direct mounting to XTENDER T-tracks

Cons

• Requires an XTENDER fence to mount

Best for: Compact jobsite and benchtop saw upgrades

Pros

• Compact thirty-six inch profile
• Dedicated bottom slot for feed supports
• Integrated shop hanging hole

Cons

• Clamps and feed supports sold separately

Best for: Full-size cabinet saws needing extended fence support

Pros

• Rigid heavy-duty aluminum extrusion
• Three multi-position accessory tracks
• Wide universal saw compatibility

Cons

• Mounting clamps sold separately

For woodworkers who prefer an à la carte approach or already possess compatible hardware, the 46-inch BOW Products XT XTENDER T-Track Table provides the standalone structural extrusion. Built from heavy-duty aluminum with a sandblasted anodized black finish, this auxiliary fence measures 5 inches high and 1 inch wide with a flat 4-inch vertical working face. The substantial height provides the physical support necessary to keep wide panels and face frames square against the table during rip operations.

Three integrated T-slots run along the face, top, and rear of the extrusion, accommodating 1/4-inch and 5/16-inch T-bolts for stops, featherboards, and customized shop jigs. Strategically milled rear slots let you clamp the extrusion to your stock fence in forward, centered, or rearward positions using Bow T-Track clamps. Bottom standoffs ensure smooth workpiece movement without dragging against the table surface. While the listing notes compatibility with portable saws, cabinet saws, UniSaw, Harvey fences, and bandsaws, the mounting clamps and feed supports must be acquired separately.

This 46-inch standalone unit is best suited for cabinet saw owners and shops handling full 8-foot sheet goods that require maximum rail length. Woodworkers running smaller benchtop equipment with limited table depth will find the shorter 36-inch model a more balanced fit.

BOW Products XT XTENDER XT536 Table

The BOW Products XT XTENDER XT536 Table brings the same structural benefits of the extrusion system into a compact 36-inch length under model number XT536. Crafted from heavy-duty silver anodized aluminum, this 3.1-kilogram extrusion features a 5-inch total height, a 1-inch width, and a smooth 4-inch vertical face. It is specifically scaled to expand the infeed, outfeed, and vertical support of benchtop, jobsite, contractor, and band saw fences without protruding excessively past compact saw tables.

Like its larger sibling, the XT536 features three multi-position T-slots on its face, top, and back surfaces accepting standard 1/4-inch and 5/16-inch T-bolts. The bottom profile includes a dedicated slot built to accept XT1 Feed Supports, while bottom standoffs keep the fence glides elevated above the saw table. It features an integrated hang hole for organized storage when dismounted. Woodworkers sourcing replacement hardware or planning upgrades alongside common dewalt table saw parts can use this 36-inch extrusion to stabilize rip cuts on mobile jobsite saws.

This model is the ideal choice for contractors and home hobbyists working on portable or benchtop machinery where a 46-inch rail would obstruct shop aisles. It yields to the 46-inch version when the primary workload involves continuous ripping of full-length architectural sheet goods.

BOW Products Expandable Push Block

Best for: Safe workpiece feeding across variable rip widths

Pros

• Tool-free width adjustment to six inches
• Three independent locking push fins
• Elevated angled handle keeps fingers safe

Cons

• Hand-powered accessory without fence track mounting

Workpiece control requires more than an auxiliary fence face, which is where the BOW Products Expandable Push Block enters the workflow. Listed under model number EXPS1, this tool-free safety accessory expands from 2 inches up to 6 inches wide via a single top-mounted adjustment knob. This variable geometry allows woodworkers to secure narrow strips, wide hardwood boards, and plywood panels without pausing to swap out push sticks or dedicated blocks between cuts.

Safety and ergonomics center around a tall angled handle that keeps the operator’s hand safely elevated above the cutting surface and well clear of the blade path. A thermoplastic rubber (TPR) overmold grip minimizes hand strain over prolonged sessions. On the bottom, three independent locking push fins work in tandem with a non-slip TPR base and adjustable side guide to trap both the keeper and offcut pieces, preventing workpiece chatter and drift. The body features a hollow, see-through green plastic architecture that provides an unobstructed sightline of the blade alignment before engaging the cut.

This push block suits any woodworker seeking adaptable hand safety across table saws, jointers, bandsaws, and router tables. Because it is a hand-operated push shoe rather than a fence-mounted fixture, it serves as an operational companion to the XTENDER extrusions rather than a structural guide.

BOW Products FencePRO FP4 T-Track Featherboard

Best for: Chatter-free fence-mounted vertical hold-down

Pros

• Tool-safe replaceable EVA foam feathers
• Significant vibration dampening during cuts
• Stackable modular mounting hardware included

Cons

• Requires T-track mounting surface to function

Workpiece hold-down against the table surface is handled by the BOW Products FencePRO FP4 T-Track Featherboard, sold as a 2-pack under model FP4. These red featherboards mount directly into the face T-tracks of the XTENDER extrusion or standard machine tracks using included 1/4-inch T-bolts and ergonomic adjustment knobs. Featuring a 4-inch adjustment travel slot, these featherboards secure downward pressure on material entering the blade, eliminating vertical lifting and flutter.

The defining design feature is the use of closed-cell ethylene-vinyl acetate (EVA) foam feathers rather than rigid plastic fingers. These flexible feathers absorb machinery vibration, dampen saw chatter, and provide steady downward pressure without marring delicate woods. The living-hinge geometry provides aggressive anti-kickback resistance by pinching stock against the table surface if reverse force occurs. Because the EVA feathers are soft and non-conductive, accidental blade contact will not shatter the feathers, ruin expensive carbide teeth, or harm the operator. Those pairing these units with dedicated bow featherboards for table saw setups can stack multiple FP4 units together for guiding extra-tall vertical stock.

This two-pack is essential for woodworkers who prioritize kickback prevention and smooth feed control when cutting thin strips or resawing along a tall fence. It serves as an accessory component that requires an established T-track or XTENDER rail to mount.

BOW Products XT L-Fence System XT4

The BOW Products XT L-Fence System XT4 is an engineered jig attachment designed to mount exclusively to the front face of the XTENDER fence series. Comprising two heavy-duty L-brackets, two BOW tightening knobs, a clear acrylic faceplate, and an integrated guide follower, model XT4 eliminates the need for shop-made wooden auxiliary jigs. It provides a raised horizontal shoulder above the table surface that allows pattern routing, template-guided cutting, and tapered rips without altering the machine’s primary alignment.

The clear acrylic guide plate gives the woodworker complete visibility of the layout lines, pattern edges, and workpiece surface throughout the entire cut. An exclusive adjustable guide follower allows the user to perform controlled radial cuts and curved operations along bandsaws or table saws with repeatable accuracy. By mounting directly into the upper T-tracks of the host extrusion, the L-fence creates an accurate reference plane that keeps hands away from the blade while stabilizing non-rectangular stock.

This jig is specifically engineered for woodworkers who frequently execute template ripping, furniture tapers, or pattern work and already utilize an XTENDER fence rail. Because it does not function as an independent fence, it cannot be used without an underlying BOW XTENDER aluminum extrusion.

Matching a Model to Your Setup

• Small workshop or jobsite table saw: Choose the BOW Products XT XTENDER XT536 Table for a compact 36-inch footprint that adds 5 inches of vertical support without extending awkwardly past small saw tables.
• Turnkey overhaul for contractor saws: Select the BOW Products Ultimate Table Saw XTENDER to receive the 46-inch extrusion along with mounting clamps, support feeds, and dual EVA featherboards in one unified box.
• Full-size cabinet saw ripping long lumber: Mount the standalone BOW Products XT XTENDER T-Track Table to gain 46 inches of continuous anodized aluminum face support along full-sized rip fences.
• Template shaping, tapering, and curved cuts: Add the BOW Products XT L-Fence System XT4 to an existing XTENDER rail to gain clear acrylic pattern sightlines and an adjustable follower guide.
• Thin ripping and cross-machine hand safety: Deploy the BOW Products Expandable Push Block to maintain continuous grip and multi-fin control over stock ranging from 2 to 6 inches wide.
• Chatter-free vertical hold-down on tall cuts: Install the BOW Products FencePRO FP4 T-Track Featherboard pair directly into your fence T-slots to dampen vibration with tool-safe EVA foam.

Before You Buy

Before purchasing standalone extrusions such as the 36-inch or 46-inch rails, verify your mounting hardware configuration. The product listings specify that standalone fence extrusions do not include the XT2 T-track clamps required to secure the extrusion to an existing saw fence, nor do they include the XT1 Feed Supports. Unless you already own compatible clamping hardware designed to seat into the milled rear channels, standalone extrusions cannot be mounted immediately out of the box. Woodworkers who do not have these clamps should factor them into their purchase or choose the complete ultimate kit.

Saw fence compatibility is another key consideration that requires checking your current fence dimensions. While the XTENDER extrusions feature universal rear mounting slots and specialized wide channels for Delta UniFence and Harvey systems, the listings do not specify maximum fence body widths or clamping limits for every vintage machinery brand. Additionally, the XT L-Fence System XT4 requires an underlying BOW XTENDER fence extrusion to function, as its mounting brackets are not designed to interface directly with standard bare factory rip fences.

FAQ

Can the XTENDER fence extrusions be mounted to any table saw?

The listings state that the XTENDER system offers universal fitment for portable saws, contractor saws, cabinet saws, bandsaws, and router tables when paired with Bow T-track clamps. The extrusions feature milled rear slots that clamp over standard fence bodies, along with a dedicated wide slot designed to accommodate Delta UniFence and Harvey fences.

What is the primary difference between the 36-inch and 46-inch XTENDER fences?

Aside from total length and finish color—the 36-inch model is silver while the 46-inch model features a black sandblasted anodized finish—both fences provide a 5-inch total height and a 4-inch vertical face. The 36-inch version is scaled specifically for compact portable and benchtop machines, while the 46-inch model suits larger contractor and cabinet saws handling longer sheet goods.

Are the foam feathers on the FencePRO FP4 replaceable?

Yes, the listing confirms that the closed-cell EVA foam feathers on the FencePRO FP4 are reversible and fully replaceable. They are designed to absorb vibration and can be safely cut through without damaging carbide saw teeth if accidental contact occurs.

Does the BOW Products Expandable Push Block require tools to adjust?

No, the expandable push block features a tool-free adjustment mechanism. Rotating the single top-mounted knob expands or contracts the body between 2 inches and 6 inches, locking securely at any position within that range.

Can the XT L-Fence System XT4 be used without an XTENDER fence?

No, the manufacturer listing states that the XT L-Fence System XT4 is designed exclusively to work with the BOW Products XT XTENDER Fence System. It connects via two included L-brackets that seat directly into the T-slots of the XTENDER extrusion.