DEWALT 15 Amp 8-1/4 Table Saw & Jobsite Cutting Lineup Compared

As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.

Contractors and tradespeople often evaluate whether the dewalt 15 amp 8-1/4 in. table saw meets daily jobsite demands or whether their workflow requires a full-sized rolling machine or a cordless platform. Choosing cutting equipment requires balancing transport dimensions, motor output, fence accuracy, and sheet material sizes. A comprehensive dewalt table saw comparison clarifies whether sheet goods, framing lumber, or fine interior trim constitute the primary cutting workload, ensuring professionals pick the right tool without hauling unnecessary weight.

The DEWALT table saw lineup is organized across compact benchtop units, large rolling workstations, and cordless battery platforms, supplemented by application-matched blades. The dewalt compact jobsite table saw format delivers high blade speed and sheet-ripping capacity in a manageable frame. Higher-capacity units integrate rolling stands for millwork, while the dewalt flexvolt table saw ecosystem provides cordless mobility on unpowered jobsites. Deciding which dewalt table saw to buy depends on matching these engineering profiles to daily project needs.

Criteria matrix What each model in this report is credited with

Rows are the criteria that come up in the pros and cons listed for this lineup. A check means the criterion is named in this report’s write-up of that model; a dash means it is not. Criteria that apply to every model, or to only one, are left out because they separate nothing.

Criterion	15 Amp 8-1 4 9.0/10	Table Saw 10 Inch 8.4/10	FLEXVOLT 60V MAX* Table 9.6/10	FLEXVOLT 60V MAX* Table Saw 9.8/10	Circular Saw Blade 8.4/10	DWAFV3824 Flexvolt 24T Table 9.0/10
Motor	✓Named	✓Named	✓Named	✓Named	Not named	✓Named
Rack and pinion	✓Named	✓Named	✓Named	✓Named	Not named	Not named
Rip capacity	✓Named	✓Named	✓Named	✓Named	Not named	Not named
Battery and charger	Not named	Not named	✓Named	✓Named	Not named	Not named
Patented body slots	Not named	Not named	Not named	Not named	✓Named	✓Named
Metal roll cage	✓Named	Not named	✓Named	Not named	Not named	Not named
Carbide teeth	Not named	Not named	Not named	Not named	✓Named	✓Named
Thin kerf	Not named	Not named	Not named	Not named	✓Named	✓Named
Criteria named	4 / 8	3 / 8	5 / 8	4 / 8	3 / 8	4 / 8

Built from the wording of this report, not from a bench test. A dash is not a fault: it only means the write-up does not mention that point for that model. Scores next to each model are out of 10, based on listed specifications and buyer feedback.

DEWALT Table Saws Lineup at a Glance

Best for: Framers and flooring crews handling wide stock

Pros

• Expansive 32-1/2-inch rip capacity
• Folding rolling stand included
• 3-1/8-inch cut depth at 90 degrees

Cons

• Heavy 110-pound total weight
• Larger storage footprint

The Models in Detail

DEWALT 15 Amp 8-1 4 in.

Best for: Solo carpenters needing portable sheet ripping

Pros

• Compact 54-pound metal roll cage
• 5-inch rip capacity
• Fast rack and pinion fence

Cons

• Requires corded power supply
• Stand sold separately

The DEWALT 15 Amp 8-1 4 in. benchtop saw, designated as model dewalt dwe7485, delivers ripping utility in a compact footprint. Powered by a 15-amp motor operating at 5800 RPM, it provides ample power for sheet goods and dimension lumber. The 24.5-inch rip capacity lets users rip 4×8 plywood or OSB sheets directly down the center. Telescoping rack and pinion fence rails make adjustments smooth, fast, and accurate. When maintaining tools, checking compatible dewalt table saw parts ensures mechanical assemblies retain factory alignment.

Jobsite durability and operator safety are central to the saw design. A metal roll cage base protects the motor housing and arbor from jobsite impacts. The Site-Pro Modular Guarding System allows tool-free adjustments of guarding components for swift transitions between cuts. Power-loss reset prevents accidental restarts following a power disruption if the tool is left switched on. Onboard storage secures the blade guard assembly, non-through cut riving knife, anti-kickback pawls, wrenches, miter gauge, and push stick.

Weighing 54 pounds and measuring 22.75 by 22.75 by 13 inches, this saw suits solo carpenters, remodelers, and punch-out crews needing reliable cutting without heavy equipment. It stows easily in service trucks and tight lockers. It gives way to the 10-inch rolling saw when jobs require rip capacities beyond 24.5 inches or deeper vertical passes through thick lumber.

DEWALT Table Saw 10 Inch

The DEWALT Table Saw 10 Inch, model number dewalt dwe7491rs, represents the heavy-duty segment of the brand’s cutting lineup. Driven by a 15-amp motor running at 4800 RPM, this corded table saw powers through hardwoods and framing lumber. It features an expansive 32-1/2-inch rip capacity for wide panels and trim. The rack and pinion fence includes patented material support for narrow rips, while the flip-over fence design ensures thin stock feeds cleanly past the 10-inch, 24-tooth blade.

Mobility is anchored by an integrated folding rolling stand with wheels designed for easy setup, breakdown, and stability over unpaved jobsite terrain. When organizing field setups, pairing a dewalt saw stand with heavy cutting tools shows how wheeled tubular bases improve physical ergonomics. The saw delivers a 3-1/8-inch depth of cut at 90 degrees and 2-1/4 inches at 45 degrees across a 21-7/8 by 26-3/8-inch table. A 2-1/2-inch dust port connects to shop vacuums, and onboard storage holds the guard, fence, riving knife, miter gauge, wrenches, push stick, and cord wrap.

This machine suits framing contractors, cabinet installers, and flooring specialists handling wide boards and thick stock. However, at 110 pounds, it is considerably heavier than benchtop alternatives and difficult for solo operators to carry up stairs. It gives way to compact 8-1/4-inch models when transport weight, vehicle space, and solo portability take priority.

DEWALT FLEXVOLT 60V MAX* Table Saw

Best for: Contractors already owning DEWALT FLEXVOLT batteries

Pros

• Lighter 45-pound bare tool chassis
• Brushless 5800 RPM motor
• Durable metal roll cage base

Cons

• Battery and charger sold separately
• 24-inch rip capacity limit

Best for: Tradespeople needing complete cordless jobsite cutting

Pros

• Cordless 60V FLEXVOLT operation
• Includes 60V MAX battery pack
• Fast 5800 RPM motor with brake

Cons

• Rip capacity capped at 24 inches
• Listing does not state runtime minutes

The DEWALT FLEXVOLT 60V MAX* Table Saw kit, model dewalt dcs7485t1, delivers cordless jobsite cutting without sacrificing blade speed. Powered by a 60V MAX lithium-ion battery, this saw operates on a platform that automatically switches voltage across tools and remains backward compatible with 20V MAX equipment. Its brushless motor spins an 8-1/4-inch, 50-tooth blade at 5800 RPM, providing ample speed to cut sheet goods and framing lumber on unpowered sites.

The saw provides a 24-inch rip capacity to process 4×8 plywood and OSB sheets. Telescoping rack and pinion fence rails ensure accurate, parallel fence positioning. Built for harsh conditions, the saw features a metal roll cage base for durability over plastic bases. Safety is supported by an electric blade brake and a power-loss reset system that prevents accidental restarts if power disconnects while the switch is on.

Weighing 48 pounds and measuring 23.8 by 12.9 by 23.8 inches, this kit includes one 60V battery, making it the top choice for framing crews and deck builders working off-grid. It eliminates hazardous extension cords running across active walkways. It gives way to corded 15-amp saws when operating in fixed workshops with continuous power, where rotating battery packs is unnecessary.

DEWALT FLEXVOLT 60V MAX* Table Saw

The bare-tool cordless option, designated as dewalt dcs7485b, provides the DEWALT FLEXVOLT 60V MAX* Table Saw cutting mechanism without included batteries or chargers. Featuring the same brushless motor architecture as the kit, it drives an 8-1/4-inch, 50-tooth blade at 5800 RPM using an existing 60-volt pack. It cuts framing lumber and trim with the performance expected of a commercial tool, matching the mechanical profile of corded tools like a dewalt circular saw corded setup while providing untethered mobility.

The chassis includes a 24-inch rip capacity for 4×8 sheet goods, rack and pinion fence rails, and a protective metal roll cage. Safety features include an electric arbor brake and a power-loss reset switch to safeguard against accidental restarts. Because the package excludes the battery and charger, this bare model weighs 45 pounds, making it easier to transport via its roll cage frame.

This bare-tool model is tailored for contractors and remodelers who already own DEWALT 60V FLEXVOLT batteries and chargers. It expands cordless capability without the expense of duplicate power accessories. It gives way to the full DCS7485T1 kit for tradespeople entering the 60V system who need the included battery to begin working.

DEWALT Circular Saw Blade

Best for: Framers cutting nail-embedded or rough lumber

Pros

• Reinforced tooth shoulder construction
• ToughTrack straight-tracking tooth design
• ToughCoat anti-stick resin coating

Cons

• Aggressive 24-tooth rough cut finish

The DEWALT Circular Saw Blade, model DWA181424, is an 8-1/4-inch, 24-tooth framing and ripping blade built for demanding construction cutting. It features the patent-pending ToughTrack tooth design to keep cuts tracking straight over the blade life. High-density tungsten carbide teeth provide wear resistance and durability when ripping through dense framing lumber and abrasive composite materials.

Durability is enhanced by a reinforced tooth shoulder design, which provides impact resistance against nail-embedded wood during remodeling or demolition. A ToughCoat anti-stick coating reduces friction and gumming from resins, while patented body slots reduce vibration. Combined with a thin kerf profile, the blade delivers smooth cuts and minimizes cutting resistance against the motor.

Weighing 8 ounces, this blade suits rough carpenters, framing crews, and remodelers cutting reclaimed or fastener-prone lumber where blade damage is a risk. It provides rugged longevity in tough timber. However, for cordless table saw users aiming to maximize runtime during clean sheet cutting, this impact-focused blade gives way to specialized runtime-efficiency blades.

DEWALT DWAFV3824 Flexvolt 24T Table Saw

Best for: Cordless saw users seeking maximum battery runtime

Pros

• Submicron grade carbide teeth
• Thin kerf design lowers motor drag
• Patented body slots reduce vibration

Cons

• Dedicated to 8-1/4-inch arbors

The DEWALT DWAFV3824 Flexvolt 24T Table Saw blade is a high-efficiency accessory engineered to optimize battery runtime. With an 8-1/4-inch diameter and 24-tooth configuration, this dewalt 8-1/4 table saw blade is designed for battery-powered table saws. By minimizing cutting resistance, it helps brushless motors draw fewer amps, extending the operating duration of 60V battery packs on unpowered jobsites.

The blade features submicron grade carbide teeth that maintain sharp cutting edges over long periods. Its thin kerf profile removes less material per pass, lowering cutting resistance and heat buildup. Patented body slots reduce vibration and thermal distortion, delivering smooth cuts in framing lumber, plywood, and trim stock without motor strain.

Weighing 14.4 ounces with a silver carbide finish, this blade suits tradespeople using 60V FLEXVOLT table saws who require maximum cutting footage per battery charge. It provides an efficient balance of speed and battery conservation. It gives way to reinforced framing blades when cutting reclaimed lumber containing hidden nails or abrasive construction fasteners.

Matching a Model to Your Setup

• Solo residential carpenters needing a portable 54-pound benchtop saw to rip 4×8 sheet goods will benefit most from the DEWALT 15 Amp 8-1 4 in. model.
• Hardwood flooring installers and trim crews requiring a rolling stand, 32-1/2-inch rip capacity, and a 3-1/8-inch cut depth should choose the DEWALT Table Saw 10 Inch.
• Framing contractors working on unpowered jobsites who need a complete cordless cutting package will find the DEWALT FLEXVOLT 60V MAX* Table Saw kit ideal.
• Builders who already own DEWALT 60V batteries can expand their cordless capabilities economically with the bare-tool DEWALT FLEXVOLT 60V MAX* Table Saw.
• Framers cutting demolition materials or lumber with occasional embedded nails should install the reinforced DEWALT Circular Saw Blade.
• Cordless table saw operators focused on maximizing linear feet of cutting per battery charge should select the thin-kerf DEWALT DWAFV3824 Flexvolt 24T Table Saw blade.

Before You Buy

Before choosing equipment from this lineup, buyers should verify what each package includes, as certain items are not supplied. The compact DEWALT 15 Amp 8-1 4 in. saw does not include a stand, requiring operators to provide a workbench or table. In addition, while the corded 10-inch saw specifies a 2-1/2-inch dust port, listings for the compact 8-1/4-inch models do not specify vacuum adapter diameters or dust extraction airflow requirements.

Power requirements also warrant close review. The bare-tool cordless saw listing specifies that the 60V battery and charger are sold separately, requiring buyers to verify battery compatibility. Furthermore, while FLEXVOLT listings highlight cordless runtime, they do not specify exact run-time minutes or linear cutting footage across specific wood species, as real-world results depend on feed rate, wood density, and blade condition.

FAQ

Can the DEWALT 15 amp 8-1/4 in. table saw rip full sheet goods?

Yes, the saw provides 24.5 inches of rip capacity with rack and pinion telescoping rails, which is sufficient to rip standard 4×8 plywood and OSB sheets down the center.

How does the compact 8-1/4-inch table saw differ from the 10-inch rolling model?

The compact 8-1/4-inch saw weighs 54 pounds, runs at 5800 RPM, and has a 24.5-inch rip capacity without a stand. The 10-inch saw weighs 110 pounds, runs at 4800 RPM, includes a rolling stand, provides a 32-1/2-inch rip capacity, and cuts 3-1/8 inches deep at 90 degrees.

Can DEWALT FLEXVOLT 60V table saw batteries work on 20V tools?

Yes, the listing notes that the FLEXVOLT battery automatically changes voltage when you change tools, making it backward compatible with DEWALT 20V MAX tools for extended runtime.

Does the baretool DCS7485B table saw include a battery or charger?

No, the listing explicitly notes that the battery and charger are sold separately, making it suited for tradespeople who already own 60V FLEXVOLT power packs.

What blade size fits the compact DEWALT table saw lineup?

The compact corded DWE7485 and cordless DCS7485 saws require 8-1/4-inch saw blades, such as the 24-tooth framing and runtime-efficiency blades designed for that arbor diameter.