Dyson Air Purifier Filter Comparison: Fast Compatibility Guide

As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.

Selecting replacement dyson air purifier filters requires navigating physical form factors, generational revisions, and precise chassis measurements. Dyson purifiers rely on tight pressure seals to channel ambient air through internal filtration media without edge leakage. Busy homeowners and office managers cannot afford the downtime of ordering a filter only to discover that the bracket latches fail to engage or that the internal sensor refuses to recognize the fresh component. The primary decision comes down to matching your machine’s generation, whether you operate an older tower that uses an all-in-one cylindrical barrel or a modern unit that utilizes curved two-piece semi-circular assemblies.

The product range for these machines is divided strictly by chassis generation and filtration configuration. Earlier tower designs, such as the Pure Cool Link series, house a tall continuous cylindrical filter that slides over the internal motor assembly. Later generations, including the Pure Cool, Pure Hot + Cool, and Humidify series, utilize split two-piece semicircular filters that clip directly into outer housing panels. Furthermore, newer replacement designs combine HEPA particulate material and activated carbon into unified 2-in-1 units, whereas earlier factory configurations sometimes separated them into individual layers. This dyson air purifier filter comparison evaluates six replacement models across physical specifications, filtration media, and exact model coverage to determine which dyson air purifier filter to buy for your machine.

Criteria matrix What each model in this report is credited with

Rows are the criteria that come up in the pros and cons listed for this lineup. A check means the criterion is named in this report’s write-up of that model; a dash means it is not. Criteria that apply to every model, or to only one, are left out because they separate nothing.

Criterion	360° Combi Glass Hepa 8.6/10	2 Pack 360° Combi 9.2/10	2 Pack Combi 360°Glass 8.4/10	2 Pack TP01 Filter 9.4/10	Dyson Genuine 360° Glass 9.4/10	Combi 360°Glass HEPA 8.8/10
Replacement	✓Named	✓Named	Not named	✓Named	✓Named	✓Named
Dimensions	✓Named	✓Named	✓Named	✓Named	Not named	✓Named
Complete filter	Not named	Not named	✓Named	Not named	✓Named	✓Named
H13 true HEPA	Not named	Not named	✓Named	Not named	Not named	✓Named
FSC-certified charcoal	✓Named	Not named	✓Named	Not named	Not named	Not named
Legacy tower	Not named	✓Named	Not named	✓Named	Not named	Not named
HEPA media	Not named	✓Named	✓Named	Not named	Not named	Not named
Older Link	Not named	Not named	✓Named	Not named	Not named	✓Named
Criteria named	3 / 8	4 / 8	6 / 8	3 / 8	2 / 8	5 / 8

Built from the wording of this report, not from a bench test. A dash is not a fault: it only means the write-up does not mention that point for that model. Scores next to each model are out of 10, based on listed specifications and buyer feedback.

Dyson Air Purifier Filters Lineup at a Glance

The Models in Detail

360° Combi Glass Hepa

Best for: Dual-unit refresh for HP and TP series

Pros

• 2-in-1 integrated design
• FSC-certified charcoal carbon
• Broad modern model support

Cons

• Incompatible with TP01 series
• Heavier 1.4 kg shipping weight

The 360° Combi Glass Hepa is engineered for modern generation Dyson air purifiers, functioning as a complete dual-piece replacement set. Designed by Ecleanfy under model number TP10/HP10, this package contains two units that integrate the particle filtration layer and the gas-adsorbing charcoal component into single physical blocks. The listing confirms that its activated carbon layer is made using FSC-certified charcoal powder to capture unwanted smells, cooking odors, pet dander, and smoke. The physical dimensions measure 8.07 inches long, 7.87 inches wide, and 1.38 inches thick, with an overall item weight of 1.4 kilograms. Its pleated media configuration provides broad surface exposure while fitting directly into the snap-in curved side doors of compatible appliances.

Compatibility is extensive across contemporary hardware lineups. This model serves as an effective dyson hp04 filter replacement and works across HP1, PC1, TP04, TP06, TP07, TP09, TP10, TP11, HP06, HP07, HP04, HP09, HP10, HP11, PH01, PH02, PH03, PH04, HP4A, TP7A, TP4A, DP04, PH3A, HP2, and PC2 humidifying and purifying devices. However, the listing explicitly warns that it is incompatible with older legacy hardware including TP01, TP02, AM09, AM11, BP01, HP01, HP02, DP01, DP02, DP03, and HP03. Users must confirm the exact label code on the base of their machine prior to installation.

This replacement set suits busy homeowners who maintain modern sealed Dyson towers or hot-and-cool machines and prefer a bundled two-pack to reduce long-term maintenance overhead. It gives way to dedicated single-piece cylindrical cartridges if your home utilizes earlier first-generation Pure Cool Link hardware, as those machines do not support split curved brackets. The listing notes that owners must manually perform a filter indicator reset on the machine interface following installation to clear system alerts.

2 Pack 360° Combi 2 in

Best for: Users wanting detailed reset instructions

Pros

• Two-piece multi-pack value
• Clear reset guidance included
• Fiberglass HEPA media

Cons

• Excludes legacy tower models
• Requires exact strap orientation

The 2 Pack 360° Combi 2 in from isinlive provides a dual-pack solution under part number TP04-Black2, built to replicate the performance profile of manufacturer part number 965432-01. Constructed from a pairing of fiberglass particulate media and high-efficiency activated carbon, this set operates on a 2-in-1 design that consolidates particle trapping and odor control into unified curved segments. The manufacturer specifies that the fiberglass HEPA layer attaches 99.97% of airborne airborne molecules down to 0.3 microns, including dust, lint, hair, and dander. It is sold as a disposable two-piece package designed for complete replacement every 12 months under standard residential usage cycles.

This isinlive dyson filter replacement functions as a comprehensive dyson tp04 replacement filter, supporting HP1, PC1, TP04, TP06, TP07, TP09, TP10, TP11, HP06, HP07, HP04, HP09, HP10, HP11, PH01, PH02, PH03, PH04, HP4A, TP7A, TP4A, DP04, and PH3A models across Pure Cool, Pure Hot Cool Cryptomic, and humidifying series. It excludes legacy machines such as TP01, TP02, TP03, AM09, AM11, BP01, HP01, HP02, DP01, DP02, DP03, and HP03. Listing specifications highlight that physical installation requires ensuring the pull strap faces upwards before snapping the outer covers into place.

This option is ideal for users seeking clear, structured guidance on software resets, as the listing documentation explicitly details reset sequences for both newer single-button units and older dual-screen machines. It gives way to factory-branded alternatives if your facility policy mandates manufacturer-certified parts rather than third-party assemblies. The listing does not specify external physical dimensions, though its weight and bracket design match standard split-door housings.

2 Pack Combi 360°Glass HEPA+Carbon Filter

Best for: Offices needing H13-rated particulate capture

Pros

• H13 true HEPA specification
• FSC-certified paper build
• Two complete filter units

Cons

• Not compatible with TP01 series
• Manual reset mandatory

Best for: Compact storage multi-pack buyers

Pros

• Integrated 2-in-1 construction
• FSC-certified charcoal layer
• Direct part 970341-01 match

Cons

• Unsuitable for older Link purifiers
• Distinct listed dimensions

The 2 Pack Combi 360°Glass HEPA+Carbon Filter, produced by iSingo under model reference 965432-01, replaces legacy part number 970341-01. This configuration integrates pleated HEPA media and an activated carbon layer derived from FSC-certified charcoal into a consolidated 2-in-1 component. The listing describes a round filter geometry measuring 6 inches long, 5.8 inches wide, and 4.6 inches thick, weighing 1.6 pounds across the package. By uniting particulate capturing and gas adsorption into one frame, this model reduces the physical steps required during routine cartridge servicing.

Compatibility spans a broad selection of contemporary purifying lines, covering Dyson PC1, HP1, HP2, PH04, PH03, PH02, PH01, HP10, HP09, TP09, HP07, TP07, HP06, TP06, TP10, and PC2 series. It cannot be mounted in TP03, TP02, TP01, AM11, BP01, HP02, HP01, DP02, or DP01 machines. The manufacturer points out that if your original equipment originally came with separate outer mesh screens and interior carbon rings, this upgraded unified design replaces both elements in a single step.

This model suits apartment dwellers and office managers who need a quick, no-fuss maintenance swap that incorporates sustainably sourced charcoal media. It gives way to the taller cylindrical tower filters when servicing first-generation tower machines that lack the dual-bracket mechanism. The listing reminds users to disconnect unit power before starting assembly and to orient the built-in pull strap upwards during insertion.

2 Pack TP01 Filter Replacement

Best for: Owners of first-generation tower purifiers

Pros

• Dedicated TP01 to TP03 fit
• Three-stage filtration system
• Tool-free slide-in install

Cons

• Incompatible with TP04 and newer
• 6 to 12 month replacement span

The 2 Pack TP01 Filter Replacement from Cabiclean targets an entirely separate generation of machines compared to the combi-style options. Designed specifically as a dyson tp01 filter replacement, this unit features a 3-stage filtration layout composed of an outer fine pre-filter, a core HEPA filter rated for 99.97% efficiency against particles down to 0.3 microns, and an internal activated carbon layer. Unlike curved split inserts, this product is a continuous barrel assembly utilizing a slide-in mounting type. Its item dimensions measure 7.4 inches long, 7.4 inches wide, and 7.4 inches thick, presenting a uniform pleated structure built for residential and commercial spaces.

Machine compatibility is strictly limited to legacy tower platforms. It is only compatible with Dyson Tower Purifier Pure Cool Link TP01, TP02, TP03, AM11, and BP01 models, directly replacing factory part 968126-03 and engineering numbers 305158-01, 305159-01, 308400-01, and 308401-01. The listing states unambiguously that it will not fit modern HP01, HP02, HP03, DP01, DP02, DP03, TP04, TP07, TP09, TP10, HP07, HP10, TP4B, or YP7A appliances. Trying to install this cartridge into a modern split-door chassis will fail immediately due to dimensional differences.

This two-pack is the correct choice for owners of first-generation Pure Cool Link towers who want a complete tool-free replacement that captures household fumes, smoke, and volatile organic compounds. It gives way entirely to curved 360-degree combi assemblies if you own any modern numerical series like the TP04 or HP07. The manufacturer suggests replacing this cartridge every 6 to 12 months, depending on room environment and total operational hours.

Dyson Genuine 360° Glass HEPA+Carbon Replacement

Best for: Purists demanding factory-sealed OEM assurance

Pros

• Genuine Dyson factory certified
• Assured sealed HEPA filtration
• Broad modern chassis coverage

Cons

• Single filter package
• Listing includes no spare

The Dyson Genuine 360° Glass HEPA+Carbon Replacement is the official original equipment manufacturer filter produced directly by Dyson under model number 965432-01. As a dyson genuine 360 glass hepa replacement, this product is built to factory engineering tolerances to ensure fully sealed internal airflow. The listing emphasizes that third-party alternatives may fail to deliver verified sealed filtration, making this unit the manufacturer-assured choice for maintaining certified HEPA performance. The component weighs 1.3 pounds, includes one complete filter assembly with integrated handles, and is designed for standard indoor home and office air purification.

Hardware compatibility includes modern generation Dyson purifiers bearing DP, HP, PH, TP, and PC prefixes. Supported model codes comprise DP04, HP04, HP06, HP07, HP09, HP10, HP11, HP1, HP4A, HP4B, HP7A, HP7C, PH01, PH02, PH03, PH04, PH3A, PC1, TP04, TP06, TP07, TP09, TP10, TP11, TP4A, TP4B, TP7A, and TP7C. Like other combi designs, this factory component is not compatible with older TP01, TP02, or AM11 towers. Dyson advises replacing the unit every 12 months, noting that accumulated particulate matter clogs airflow passages over prolonged usage cycles.

This model is best suited for corporate environments, clinical settings, or precision-minded homeowners who require genuine factory components to maintain warranties or satisfy compliance standards. It gives way to third-party multi-packs for shoppers seeking multiple replacement cycles in a single purchase, as this listing provides a single filter unit. Dyson notes that users should locate their DP, HP, PH, TP, or PC prefix on the base sticker of the machine before finalizing an order.

Combi 360°Glass HEPA

The Combi 360°Glass HEPA manufactured by isinlive under model number 4A-TCSX-OE0M delivers an upgraded 2-in-1 combination designed to replace manufacturer part 965432-01. This listing highlights an H13 True HEPA filtration stage paired with an activated carbon filtration stage to tackle household odors, pet dander, pollen, and gases. The unit features a pleated design built with FSC-certified paper, with listed product dimensions of 8.14 inches long, 8.07 inches wide, and 8.07 inches thick. It uses a slide-in mounting profile that fits cleanly into curved chassis doors.

The model provides wide operational compatibility across newer hardware revisions, fitting HP1, PC1, TP04, TP06, TP07, TP09, TP10, TP11, HP06, HP07, HP04, HP09, HP10, HP11, PH01, PH02, PH03, PH04, HP4A, TP7A, TP4A, DP04, PH3A, and HP2. It does not fit legacy devices such as TP01, TP02, TP03, AM11, BP01, HP01, HP02, DP01, or DP02. The listing specifies that the package contains two complete filter units, providing an immediate replacement along with a secondary backup cartridge for future servicing intervals.

This filter configuration serves users who prioritize verified H13 particulate capture ratings for allergy management in residential or workspace environments. It gives way to the Cabiclean barrel filter if you are servicing an older Link series tower. Proper physical installation requires setting the strap section facing upward, followed by a manual hardware reset to ensure the machine registers the new media.

Matching a Model to Your Setup

• Legacy Pure Cool Link Towers (TP01, TP02, TP03, AM11, BP01): Install the 2 Pack TP01 Filter Replacement, which provides the correct 7.4-inch cylindrical slide-in geometry that newer split combi filters cannot match.
• Modern Heating and Cooling Purifiers (HP04, HP07, HP09, HP10): Select the 360° Combi Glass Hepa for an integrated 2-in-1 FSC-certified charcoal setup that drops directly into curved lateral side panels.
• Workplaces Requiring OEM Certification: Choose the Dyson Genuine 360° Glass HEPA+Carbon Replacement to ensure factory-certified seals and retain manufacturer performance compliance.
• High-Allergen Spaces Demanding H13 Media: Mount the Combi 360°Glass HEPA from isinlive to utilize H13 True HEPA paper construction against microscopic airborne dust and pollen.
• Homes Needing Streamlined Reset Procedures: Deploy the 2 Pack 360° Combi 2 in for its step-by-step remote control reset instructions that cover both unified and dual-display hardware versions.
• Humidifying Pure Cool Models (PH01, PH02, PH03, PH04): Use the 2 Pack Combi 360°Glass HEPA+Carbon Filter by iSingo to restore both particulate and activated carbon absorption in combination machines.

Before You Buy

When purchasing replacement dyson air purifier filters, check the physical label pasted to the underside or rear housing of your machine before placing an order. Dyson purifiers share similar exterior tower profiles, making it easy to mistake a first-generation TP02 for a modern TP07. However, the internal mounting mechanisms differ completely: earlier series require continuous slide-in cylindrical barrels, while later models demand semicircular two-piece panels with designated pull tabs. If your home air quality setup includes other hardware brands, comparing maintenance intervals against systems like sans air filter hardware or checking morento air purifier filter replacements highlights how unique Dyson’s curved latching mechanism remains.

The product listings do not specify identical dimensional measurements across different third-party brands, even when designed for the exact same Dyson chassis. Variations in listed thickness, length, and frame curvature reflect differences in how brands package or measure their pleated assemblies rather than functional discrepancies. Furthermore, listings rarely supply individual CADR ratings for third-party media, stating instead that they adhere to 99.97% capture efficiencies at 0.3 microns. Those managing varied fleets of purifiers may also consult our overview of molecule air filter replacements to see how alternative technologies compare in long-term room air turnover.

FAQ

How do I know if my Dyson requires a 2-in-1 filter or a separate carbon ring?

Early revisions of modern Dyson purifiers like the TP04 and HP04 originally shipped with a separate inner activated carbon ring and an outer glass HEPA mesh. Modern replacement assemblies, including all combi options listed here, combine both stages into a single 2-in-1 curved unit that snaps in simultaneously, eliminating the need to manage two distinct nested filters.

Why does my Dyson purifier display a filter error after installing a new cartridge?

Dyson purifiers do not use electronic sensors to detect filter cleanliness; they utilize internal timers based on operating hours. When you install any new filter, you must manually reset the indicator. On newer remotes, press and hold the Night Mode button for five seconds. On older dual-screen machines, you must reset the HEPA and Carbon monitors independently according to your user manual.

Will a TP04 filter fit into an older TP01 or TP02 tower?

No, a TP04 filter will not fit a TP01 or TP02 purifier. The TP01 and TP02 models use an unbroken circular cylindrical barrel that slides over the machine’s central column. The TP04 and later iterations use two curved semicircular panels that snap into the side doors of the lower chassis.

What does the FSC certification on certain filter listings mean?

The FSC designation mentioned on models like the RefreshYourHome and iSingo replacements indicates that the charcoal powder and base paper media originate from responsibly managed forests certified by the Forest Stewardship Council, offering an environmentally verified material standard.

How frequently should replacement filters be swapped in residential setups?

Most manufacturers, including Dyson, recommend replacing filter cartridges every 12 months based on twelve hours of daily use. However, high-dust environments, homes with multiple shedding pets, or continuous operation may require replacements closer to the 6-month mark.