GoingMake Table Saw Miter Gauge Comparison: Which Model Fits Your Shop?

As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.

Selecting the right table saw miter gauge involves balancing fence reach, overall assembly mass, and repeatable stop precision against the physical dimensions of your saw top. Standard factory gauges frequently deliver loose miter slot tolerances and rudimentary protractor plates that compromise joinery. Choosing an upgraded assembly requires assessing whether your shop workflows prioritize compact handling for swift crosscuts or heavy, telescoping extrusions capable of supporting broad sheet stock without deflection.

The GoingMake lineup is organized primarily around fence design, sliding bar length, and stop complexity to accommodate distinct workshop footprints. Their catalog spans ultra-compact units built with short bars for jobsite tools, rigid fixed-fence models for everyday cabinet work, and high-mass telescoping systems engineered for extended crosscut capacity. Understanding how these configurations vary in bar adjustment, detent layouts, and micro-adjust calibration ensures you choose the model best tailored to your machine bed.

Criteria matrix What each model in this report is credited with

Rows are the criteria that come up in the pros and cons listed for this lineup. A check means the criterion is named in this report’s write-up of that model; a dash means it is not. Criteria that apply to every model, or to only one, are left out because they separate nothing.

Criterion	Table Saw Miter Gauge 8.6/10	Compact Table Saw Miter 8.8/10	Table Saw Miter Gauge (3) 9.8/10	Professional Table Saw Miter 8.8/10	Table Saw Miter Gauge (5) 8.2/10	Small Table Saw Miter 8.6/10
Millimeter and inch	✓Named	Not named	✓Named	Not named	Not named	✓Named
Expansion rings	✓Named	Not named	✓Named	Not named	Not named	✓Named
Positive angle detents	Not named	Not named	Not named	✓Named	Not named	✓Named
Stop with optical	✓Named	Not named	✓Named	Not named	Not named	Not named
Telescoping fence	Not named	✓Named	Not named	✓Named	Not named	Not named
Micro-adjust flip	✓Named	Not named	Not named	Not named	✓Named	Not named
Precision angle	✓Named	Not named	Not named	Not named	✓Named	Not named
Inch scales	✓Named	Not named	Not named	Not named	Not named	✓Named
Criteria named	6 / 8	1 / 8	3 / 8	2 / 8	2 / 8	4 / 8

Built from the wording of this report, not from a bench test. A dash is not a fault: it only means the write-up does not mention that point for that model. Scores next to each model are out of 10, based on listed specifications and buyer feedback.

GoingMake Miter Gauges Lineup at a Glance

The Models in Detail

GOINGMAKE Table Saw Miter Gauge

Best for: Wide panel crosscuts requiring maximum reach

Pros

• Long 21 to 38 inch telescoping fence
• 13 precision angle detent holes
• Micro-adjust stop with optical magnifier

Cons

• Extended fence can overhang small tables
• Listing does not detail package components

Best for: Rigid standard crosscutting without telescoping flex

Pros

• Solid 18-inch one-piece extrusion
• High-precision micro-adjust flip stop
• Dual millimeter and inch scales

Cons

• Cannot extend beyond 18 inches
• Requires auxiliary support on wide sheet goods

Best for: Mid-sized shop crosscutting versatility

Pros

• 18 to 32 inch extendable fence
• 001-inch micro-adjust flip stop
• 4 expansion rings eliminate slot play

Cons

• Heavier than fixed 18-inch models
• Listing omits replacement hardware part numbers

The GOINGMAKE Table Saw Miter Gauge, cataloged under model number 0727A, is built around an extruded aluminum alloy fence that extends from 18 inches out to 32 inches. This telescoping action provides broad workpiece support when crosscutting wider boards, eliminating the need to set up makeshift outboard auxiliary fences. The assembly relies on an upgraded angle stop mechanism utilizing a push-button selector that engages precision-machined holes to lock in square cuts and standard miter angles without protractor drift.

Repeatable accuracy is governed by a micro-adjustable flip stop featuring an integrated magnifying glass for reading the dual millimeter and inch scales. According to the listing specifications, this stop locks firmly to achieve setting accuracy up to 0.001 inches while preserving fluid motion with minimal backlash. The sliding bar adapts to standard 3/8-inch by 3/4-inch T-slots and U-slots using four adjustable expansion rings designed to eradicate lateral play inside the table channel.

Weighing 5.54 pounds, model 0727A provides balanced structural mass suited for intermediate shop crosscuts and furniture joinery. It suits woodworkers who require extendable fence reach on hybrid or cabinet saws but want to maintain reasonable assembly weight. Where cutting demands strictly stay under 18 inches without telescoping movement, the fixed-fence 0727B serves as the more straightforward alternative.

GOINGMAKE Compact Table Saw Miter Gauge

Best for: Compact jobsite table saw setups

Pros

• Compact 360mm fence profile
• 11 positive angle detents
• Locating pin for angled workpieces

Cons

• Fixed 14-inch fence length
• Lacks telescoping fence extension

Designed specifically for tighter workspaces, the GOINGMAKE Compact Table Saw Miter Gauge (model 0729-360mm) utilizes a shorter 360mm (roughly 14-inch) aluminum alloy fence and matching 360mm miter bar. This compact footprint prevents the fence and guide bar from overhanging small portable tool surfaces, making it a natural companion when positioning a portable saw on a dewalt saw stand on jobsite locations. The entire metal construction weighs 3.54 pounds, balancing functional rigidity with easy portability.

Angle management on this compact guide is controlled through 11 positive detents: 90°, 60°, 45°, 30°, 22.5°, 15°, 0°, and negative angle equivalents down to -60°. The included smart flip stop supports both square and angled workpiece faces using a dedicated locating pin, paired with a magnifier lens over laser-etched imperial and metric scales. The 360mm miter bar incorporates adjustment rings at the front, middle, and rear to ensure smooth, zero-slop travel through standard table slots.

This compact model is engineered for trim carpenters and hobbyists operating benchtop or mobile contractor saws. It replaces imprecise stock factory gauges without overwhelming the saw deck. For users operating large cabinet machines who routinely crosscut wider panels, this unit gives way to the longer telescoping models in the range.

GOINGMAKE Table Saw Miter Gauge

The GOINGMAKE Table Saw Miter Gauge (model 0727B 18 inch) is constructed with a rigid, non-extending 18-inch extruded aluminum fence. By eliminating telescoping sections, this unit delivers absolute fence flatness across its entire length. It pairs effectively with accessories like bow featherboards for table saw setups when handling precise, repeatable stock feeding against the table blade.

Like its extendable counterpart, model 0727B includes the 0.001-inch micro-adjustable flip stop with optical magnification, enabling reliable zero calibration against clear laser-engraved millimeter and inch markings. The protractor head utilizes the button-activated detent pin system with precision index holes for rapid indexing at common joinery angles. Sliding stability is achieved through a standard 3/8-inch by 3/4-inch bar governed by four expansion rings that remove side-to-side wobble in T-track or U-track grooves.

At 4.74 pounds, this solid miter assembly is suited for cabinetmakers and hobbyists who primarily crosscut dimensioned lumber under 18 inches wide and demand zero fence deflection. When wider casework panels or extended shelving require direct stop-block positioning beyond 18 inches, woodworkers should step up to the extendable 0727A or long 0E4455.

GOINGMAKE Professional Table Saw Miter Gauge

Best for: Heavy-duty cabinet saw precision cutting

Pros

• Telescoping fence extends to 36 inches
• Substantial 10.98-pound metal mass
• Dedicated fast zero-calibration dial knob

Cons

• Too heavy for small portable saws
• Large physical footprint

The GOINGMAKE Professional Table Saw Miter Gauge, carrying part number TSMG5ULTRA, represents the heaviest, most robust build in the brand catalog. Weighing 10.98 pounds, this heavy-duty metal and aluminum alloy unit provides substantial mass to anchor large workpieces securely against the blade. The fence starts at a standard 19.5-inch width and telescopes out to support crosscuts up to 36 inches, providing expansive support for large cabinetry projects.

A notable functional feature on the TSMG5ULTRA is the fast zero calibration knob. According to the manufacturer listing, setup is executed by sliding the fence to maintain a 1 to 3mm gap from the blade, advancing the flip stop to contact the blade tooth, and locking the zero calibration knob to establish an immediate true zero point. The micro-adjustable flip stop offers 0.001-inch (0.0254mm) indexing accuracy, while the protractor head features 11 positive angle detents covering primary positive and negative cutting positions.

The miter bar features expansion adjusters positioned at the front, center, and back to guarantee uniform sliding resistance across deep cast-iron machine beds. This model is engineered specifically for full-sized cabinet saws and stationary cast-iron table tops. Its substantial 11-pound mass and long body make it excessive for lightweight contractor units, where smaller tools like the 0729 or 0122A are better proportioned.

GOINGMAKE Table Saw Miter Gauge

Offering the longest extension capacity in the lineup, the GOINGMAKE Table Saw Miter Gauge (model 0E4455) features an extruded aluminum fence that expands from an initial 21 inches out to a full 38 inches. This reach allows woodworkers to execute wide panel crosscuts and long trim sizing without needing standalone cut-off sleds or external tape measures. The protractor head is upgraded with 13 precision angle stop holes, expanding mechanical detent options for angle cutting.

The assembly integrates the standard high-precision micro-adjust flip stop with a magnifying viewer, maintaining 0.001-inch positioning accuracy along the extrusion. Zero calibration ensures that fence scale readings match exact cut lengths across both imperial and metric increments. The bar mechanism utilizes the four-ring expansion system, engineered to achieve a zero-clearance fit in conventional 3/8-inch by 3/4-inch table saw slots.

Weighing 5.99 pounds, model 0E4455 delivers considerable fence reach without the extreme physical weight of the professional 11-pound unit. It is suited for woodworkers building large furniture, entertainment centers, or wide casework. However, on compact jobsite saws with narrow tabletops, the 21-inch retracted fence may overhang the side wings excessively, making shorter configurations more practical.

GOINGMAKE Small Table Saw Miter Gauge

Best for: Portable saws and tight workbench spaces

Pros

• Ultralight 2.23-pound aluminum body
• Short 12-inch miter slide bar
• 11 positive angle stops

Cons

• Limited 12-inch fence support
• Lacks fine-thread vernier adjust knob

The GOINGMAKE Small Table Saw Miter Gauge (model 0122A) is the most lightweight entry in the lineup, weighing just 2.23 pounds. Designed specifically for compact jobsite machines, mobile outdoor rigs, and smaller workshop tools such as a portable metabo table saw, this unit features a 12-inch aluminum alloy fence and a matching 12-inch miter slide bar.

Despite its mini form factor, model 0122A maintains 11 positive angle detents covering standard angles from 90° through 15° in both positive and negative orientations. The 12-inch fence features laser-engraved millimeter and inch scales paired with an adjustable flip stop for quick zero calibration and repeatable cutoff lengths. The 12-inch guide bar fits standard 3/8-inch by 3/4-inch T-slots and U-slots, utilizing expansion rings to eliminate clearance play.

This compact tool is tailored for site carpenters, trim installers, and craft woodworkers who require clean miter accuracy on portable saws where long guide bars collide with rear outfeed setups or table surrounds. For heavy shop use involving deep crosscuts on thick hardwoods, its lightweight build naturally gives way to the heavier 0727B or the telescoping 0727A.

Matching a Model to Your Setup

• For compact jobsite and portable table saws: The GOINGMAKE Small Table Saw Miter Gauge (model 0122A) or the GOINGMAKE Compact Table Saw Miter Gauge (model 0729-360mm) prevent overhang and ensure balanced sliding on small metal surfaces.
• For standard cabinet saws handling general furniture joinery: The GOINGMAKE Table Saw Miter Gauge (model 0727B 18 inch) provides a rigid, non-flexing extruded face without telescoping seams.
• For medium-sized workshops needing panel versatility: The GOINGMAKE Table Saw Miter Gauge (model 0727A) provides a flexible 18 to 32-inch extendable fence while maintaining a moderate 5.54-pound footprint.
• For stationary cast-iron cabinet saws handling heavy stock: The GOINGMAKE Professional Table Saw Miter Gauge (model TSMG5ULTRA) offers maximum mass, a fast zero-calibration dial, and crosscut support up to 36 inches.
• For wide sheet goods and extended case framing: The GOINGMAKE Table Saw Miter Gauge (model 0E4455) delivers maximum fence reach, expanding out to 38 inches with 13 detent positions.

Before You Buy

Before purchasing any miter gauge from the GoingMake lineup, verify the exact dimensions of your table saw miter slot. While these gauges are engineered to fit industry-standard 3/8-inch by 3/4-inch T-slots and U-slots through adjustable expansion rings, the product listings do not specify compatibility with non-standard proprietary grooves found on certain entry-level homeowner saws. Ensure your machine features standard parallel channels to allow the expansion rings to seat properly.

Additionally, review the physical clearance surrounding your blade and table edges. The listings do not provide individual component replacement part numbers for the magnifying lenses or flip stop thumb screws, meaning users must take care not to misplace small mounting hardware. When opting for longer extendable fences like the 38-inch model 0E4455, verify that your table wings provide adequate outboard support to prevent extended fences from dipping when fully expanded.

FAQ

Do GoingMake miter gauges fit standard 3/8-inch by 3/4-inch miter slots?

Yes. The manufacturer listings specify that GoingMake miter bars are designed to adapt to standard 3/8-inch deep by 3/4-inch wide T-slots and U-slots. The bars incorporate adjustable expansion rings that expand outward to remove lateral play and ensure smooth sliding travel along the channel.

How does the micro-adjust flip stop work?

The micro-adjustable flip stop incorporates a magnifying lens over dual imperial and metric fence scales. Once the primary stop position is set along the fence extrusion, a fine-adjustment thumb screw allows micro-positioning up to 0.001 inches of precision, locking solidly in place with minimal backlash for repeatable cut lengths.

What is the difference between the GoingMake 0727A and 0727B models?

The primary distinction lies in fence construction. The 0727A features an extendable aluminum fence that telescopes from 18 inches up to 32 inches, weighing 5.54 pounds. The 0727B features a solid, non-extending 18-inch fence weighing 4.74 pounds, prioritizing absolute rigidity across its face over variable length support.

How do you calibrate zero on the TSMG5ULTRA model?

The TSMG5ULTRA listing specifies a fast zero calibration feature utilizing a dedicated knob. The operator slides the fence extrusion to maintain a 1 to 3mm clearance gap from the saw blade, moves the flip stop into contact with the saw blade tooth, and locks the zero adjustment knob to instantly establish an accurate zero datum point.

Which GoingMake model is best suited for jobsite saws?

Model 0122A and model 0729-360mm are specifically designated for portable and jobsite saws. With fence profiles of 12 inches and 360mm (14 inches) respectively, and weights under 4 pounds, they maintain proper center-of-gravity balance without extending past the boundaries of smaller table saw tops.

Can the positive angle detents be bypassed for custom angles?

The listings specify mechanical detents for primary woodworking cuts (such as 90°, 45°, 30°, and 22.5°), supported by secure locking handles. However, the manufacturer data does not specify whether fractional, non-standard angles between positive holes can be locked with identical mechanical rigidity.