Top WORX Trimmer Lines: Decisive Spool Picks for Fast Maintenance

As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.

Trimming turf borders and clearing overgrown edges requires a steady supply of dependable cutting filament. When servicing your equipment, choosing the correct worx weed string comes down to two major technical factors: line thickness and the physical dimensions of the spool hub. Most residential battery trimmers operate using a 0.065-inch single-line feed that relies on centrifugal force and automated line advance. Choosing the wrong spool diameter or profile causes feeding failures, melted line inside the housing, or poor cutting performance along brick walkways and fence posts.

The available replacement spools divide cleanly according to trimmer motor class and spool retention style. For popular 20-volt and 32-volt tools such as the worx weed wacker line, the catalog features standard 0.065-inch spools centered around the WA0010 and WA0004 geometries. These range from official equipment manufacturer packs to aftermarket bulk bundles that include fresh retainer caps. Meanwhile, dedicated high-power 40-volt or heavy-duty units step up to a reinforced 0.080-inch line spool. Understanding this worx trimmer line comparison ensures you select the exact spool architecture required by your specific yard tool.

Criteria matrix What each model in this report is credited with

Rows are the criteria that come up in the pros and cons listed for this lineup. A check means the criterion is named in this report’s write-up of that model; a dash means it is not. Criteria that apply to every model, or to only one, are left out because they separate nothing.

Criterion	Eventronic 15 9.4/10	Weed Eater String Compatible 8.4/10	Oregon 4-Pack Worx WA0004 9.2/10	WORX Replacement Spool & 8.6/10	WORX Replacement Spool & Line 9.0/10
Replacement	✓Named	Not named	✓Named	✓Named	✓Named
Aerodynamic	Not named	✓Named	✓Named	✓Named	✓Named
Pre-wound spools	✓Named	Not named	✓Named	✓Named	Not named
Trimmers	✓Named	Not named	✓Named	Not named	✓Named
Tensile strength	Not named	✓Named	Not named	✓Named	Not named
Line profile	Not named	✓Named	Not named	✓Named	Not named
Spool caps	Not named	Not named	✓Named	✓Named	Not named
Aftermarket	✓Named	✓Named	Not named	Not named	Not named
Criteria named	4 / 8	4 / 8	5 / 8	6 / 8	3 / 8

Built from the wording of this report, not from a bench test. A dash is not a fault: it only means the write-up does not mention that point for that model. Scores next to each model are out of 10, based on listed specifications and buyer feedback.

WORX Trimmer Lines Lineup at a Glance

The Models in Detail

Eventronic 15

Best for: Homeowners needing bulk spools and spare caps

Pros

• 12 pre-wound spools included
• Includes 3 replacement caps
• 35% higher wear resistance

Cons

• Aftermarket manufactured
• Not for 0.080-inch trimmers

The Eventronic 15 package is an aftermarket maintenance bundle designed for property owners who run their trimmers regularly and want a substantial supply of consumable parts on hand. The package consists of 12 pre-wound replacement spools paired with 3 replacement cap covers. Eventronic builds these spools with a high-strength nylon filament engineered to prevent line breakage during high-speed edging. According to the listing, this nylon compound provides 35 percent greater wear resistance than standard baseline lines, reducing the need for constant maintenance stops.

In terms of performance, the line is shaped to sustain low-resistance cutting at high rotational speeds, which decreases motor drag and improves overall cutting efficiency by 40 percent. This spool configuration acts as a direct substitute for the worx wa0010 replacement spool footprint and fits an extensive catalog of trimmers, including the WG122, WG150 through WG157, WG160 through WG163, WG165 through WG167, WG170, WG175, and WG180. The automatic feed system eliminates manual winding entirely, allowing the spool to snap straight into the hub.

This package best serves homeowners who manage large suburban yards and frequently wear down plastic hub caps against hard sidewalks. If you only have a small patio lawn or prefer original equipment manufacturer parts, this 15-piece multipack may provide more hardware than you need, making a compact factory pack a more proportional option.

Weed Eater String Compatible with Worx

Best for: Large yards requiring maximum refill capacity

Pros

• 16 spools and 4 caps
• 100-pound tensile strength
• Aerodynamic line profile

Cons

• Third-party brand
• Standard 0.065 line only

For users demanding maximum bulk storage for extended property maintenance, the Weed Eater String Compatible with Worx kit delivers one of the largest hardware counts available. Packaged under model number WA01-20P by GOSDENG, this set contains 16 individual WA0010-compatible spools alongside 4 WA6531 spool cap covers. Each individual spool is pre-wound with 10 feet of 0.065-inch line, yielding a total of 160 feet of cutting material. Homeowners researching worx weedeater string options will appreciate the high line volume provided in this comprehensive refill set.

The filament is fabricated from upgraded nylon polyamide resin that boasts a tensile strength exceeding 100 pounds, providing 30 percent higher durability compared to standard aftermarket alternatives. Centrifugal force and aerodynamic styling lower air drag, which allows the line to spin freely while easily slicing through dense weeds and lawn grasses. The listing also highlights that the flexible trimmer spool allows the line to stretch and cushion on hard surfaces, increasing cutting efficiency by 50 percent during perimeter trimming.

This 20-piece kit is ideally suited for landscapers and homeowners with expansive turf areas who go through worx weed eater refill line at a rapid pace. It covers tools across the WG150 through WG180 series. However, if your trimmer requires the heavy-duty 0.080-inch line found on dedicated 40-volt models, this standard 0.065-inch setup will not suit your machine.

Oregon 4-Pack Worx WA0004 Replacement Spool

Best for: Dense weeds and heavy grass cutting

Pros

• Square-twist Gatorline profile
• Reduced vibration and drag
• Easy 3-step snap-in fit

Cons

• No replacement caps included
• Smaller four-pack count

Manufactured by Oregon Tool, the Oregon 4-Pack Worx WA0004 Replacement Spool brings heavy-duty specialty filament engineering to the residential yard maintenance platform. Sold under part number 652808, this bundle contains four pre-wound spools loaded with Oregon Gatorline. While most standard options utilize round nylon profiles, this spool utilizes a specialized square-twist filament design. The sharp exterior edges of the square cross-section deliver cleaner shearing cuts across thick lawn weeds and tall grass rather than tearing the plant stalks.

The twisted geometry of this line also serves a mechanical function by stabilizing airflow around the trimmer head. This aerodynamic optimization dampens operating noise, lessens trimmer vibration, and reduces drag on the electric motor, which is particularly advantageous for battery-powered weed trimmers where preserving battery runtime is critical. Designed as a guaranteed replacement for the worx wa0004 replacement spool standard, it drops into tools across the WG122, WG150 through WG157, WG160, WG163, WG165 through WG167, WG170, WG175, and WG180 families in a simple three-step snap-in process.

This Oregon pack is the definitive choice for homeowners dealing with tough, fibrous overgrowth or coarse field grasses that tend to snap conventional round lines. It trades away the massive spool counts of budget multipacks to offer premium cutting geometry. If you require spare spool caps, note that this four-pack does not bundle extra covers, so you will need to retain your trimmer’s existing plastic cap.

WORX Replacement Spool & Line

Best for: Users seeking original factory equipment fit

Pros

• Official WORX factory part
• DNA2 DoubleHelix aerodynamic shape
• Over 100-pound tensile strength

Cons

• No spool caps included
• Only 10 feet per spool

The official WORX Replacement Spool & Line pack represents the original manufacturer standard for the company’s compact cordless trimmer catalog. Sold as part number WA0010, this six-pack includes six factory pre-wound spools, each containing 10 feet of patented DNA2 DoubleHelix cutting line for a total of 60 feet of material. Each spool is pre-wound to factory specifications, ensuring seamless integration with the automated line feed mechanisms without snagging or irregular unwinding during acceleration.

The proprietary DNA2 DoubleHelix line features an aerodynamic, oval twisted shape engineered specifically to minimize wind resistance and air friction. This reduced drag allows the trimmer head to maintain maximum rotational velocity, improving the efficiency of edging passes while extending battery life per charge cycle. Despite its slender 0.065 worx trimmer line profile, the line achieves a rated tensile strength of over 100 pounds. This balance of flexible thinness and high tensile resilience enables the filament to cleanly slice dense sod and turf without premature snapping at the eyelet.

This genuine six-pack is tailored for users who prefer sticking strictly to original equipment parts to maintain factory tolerances and predictable feeding behavior across 20V, 32V, and select 40V tools. It covers over 25 individual tool models across the brand. However, if your edging tasks involve heavy contact against rough concrete that frequently cracks the spool cover, you will need to purchase caps separately, as this factory box contains only line spools.

WORX Replacement Spool & Line

When stepping up to heavy-duty clearing and commercial-style lawn detailing, the WORX Replacement Spool & Line under model number WA0014 provides the reinforced cutting line required for high-output tools. Unlike the standard 0.065-inch spools that service lighter trimmers, this single-pack spool features a thick 0.080-inch copolymer nylon resin filament. The spool comes loaded with 20 feet of line, offering double the line length of standard residential spools on a single heavy-duty hub.

The WA0014 spool incorporates an oval aerodynamic DoubleHelix DNALINE2 architecture that slashes drag during high-RPM rotation while increasing edging lifespan by up to 25 percent compared to standard use conditions. The copolymer resin is specifically formulated to remain pliable and flexible under stress. This flexibility allows the line to stretch slightly and cushion itself upon violent contact with chain-link fences, curbs, and stone borders rather than snapping flush at the spool eyelet. It easily installs into the brand’s no-bump trimmer heads.

This thicker worx wa0014 spool is specifically designed to fit high-voltage models including the WG168, WG184, WG190, and WG191 trimmers. It gives way to the lighter 0.065-inch options if you own a standard 20V tool like the WG163 or WG170, as the 0.080-inch line and spool housing are physically incompatible with smaller residential trimmer heads.

Matching a Model to Your Setup

• For high-volume trimming across large properties with frequent cap wear: Choose the Weed Eater String Compatible with Worx kit, which provides 16 pre-wound spools and 4 replacement covers to keep you working through multiple seasons without additional hardware purchases.
• For overgrown weeds, tough briars, and fibrous field grass: Select the Oregon 4-Pack Worx WA0004 Replacement Spool to take advantage of the square-twist Gatorline profile that slices cleanly where round lines often deflect.
• For suburban routine maintenance requiring OEM reliability: Pick the WORX Replacement Spool & Line 6-pack (WA0010) to ensure exact factory feeding tension and optimal battery runtime on your 20V or 32V tool.
• For high-power yard clearing with 40-volt trimmers: Install the WORX Replacement Spool & Line (WA0014), which provides the heavy 0.080-inch line diameter required by larger machines like the WG168 and WG184.
• For routine residential trimming where you want backup hardware: Opt for the Eventronic 15 pack, which pairs 12 standard 0.065-inch spools with 3 spare retainer caps for balanced long-term coverage.

Before You Buy

Before purchasing a pre-wound worx trimmer line, confirm your tool’s exact model number on its motor housing or battery cradle. While many aftermarket and original spools share similar exterior dimensions, line gauge differences represent a hard compatibility boundary. Standard 20V residential trimmers cannot feed 0.080-inch line, and running heavier filament through an undersized eyelet will cause motor overheating or jammed feed channels. Similarly, if you are comparing different brands such as a dewalt cordless weed trimmer, be aware that spool locking tabs and diameter standards vary completely between manufacturers.

Review what each package includes before completing your order. The listings for the factory WORX six-pack (WA0010), the WA0014 single pack, and the Oregon 4-pack do not include replacement spool cap covers or retention springs. If your existing trimmer cap is cracked from dragging on pavement, you will need to purchase an aftermarket bundle that includes WA6531 caps or source the caps separately. Furthermore, the listings do not specify line storage shelf life, so keeping spare nylon spools in a cool, sealed container is recommended to prevent the polyamide resin from drying out and turning brittle over time.

FAQ

Which WORX trimmer line to buy for standard 20V trimmers?

For standard 20V trimmers like the WG163 and WG170, purchase spools using 0.065-inch line compatible with the WA0010 or WA0004 footprint, such as the genuine WORX WA0010 six-pack or compatible bulk packs.

What is the difference between WA0010 and WA0014 spools?

The WA0010 spool holds 10 feet of 0.065-inch line for compact 20V and 32V trimmers, while the WA0014 spool holds 20 feet of heavier 0.080-inch line designed specifically for higher-output tools like the WG168, WG184, WG190, and WG191.

Can I use 0.080 line in a 0.065 WORX trimmer?

No. The feeding eyelets and motor drive on 0.065-inch trimmers are calibrated for thin filament. Inserting 0.080-inch line will cause mechanical binding, feeding failure, and potential motor strain.

Are replacement spool caps included with all trimmer line packages?

Replacement caps are only included with select multipacks like the Eventronic 15 pack and the GOSDENG 20-piece kit. Factory WORX packs and Oregon spools include line spools only and do not specify included caps.

How does twisted trimmer line compare to standard round line?

Twisted line profiles, such as the Oregon Gatorline square twist or WORX DoubleHelix, reduce aerodynamic drag and operating noise while offering sharper cutting edges that sever thick grass cleanly.